DIY Christmas Soaps
Level:
Intermediate
How-To:
Beauty, Handmade
Seasonal Event:
Christmas
Materials
- White soap block
- Clear soap block
- Soap Mold
- Soap Fragrance
- Soap Colorant
- Soap injector tool
- Soap clean up tool
Directions
- Take your soap injector & cut off the tip to make the hole bigger
- Then take your white soap & & chop it up
- Put chopped soaps into container & put in microwave for 30 second intervals
- Pull out when finally melted
- The temperature of the soap should be between 130 degrees & 140 degrees
- Spray rubbing alcohol into the mold cavity
- Use the injector tool & fill up the mold details of the snowflake & the gingerbread man
- If you splash some of the soap elsewhere or outside of the line, let it dry just a little & scrap off mistakes with the clean up tool
- Let the details dry for about 10 minutes
- Now it’s time to create the rest of the soaps
- Cut your clear soaps up & then separate into 3 different containers
- Take your container & melt your soap in the microwave
- Once melted chop off small chunks of your brown soaps, blue soaps, & green soaps
- For the first container put in your brown soap coloring & then stir
- Do the same for the blue & green soaps
- Spray mold with rubbing alcohol & pour brown soap into the gingerbread man
- Pour your blue coloring into the snowflake mold
- Pour your green coloring into the tree mold
- If you have any bubbles just spray with rubbing alcohol & they’ll disappear!
- Let soaps dry for about 3 hours or until completely cooled & hardened
Check out these out! bath fizzies, candy cane soap, bath bombs
