Materials
- VHS tapes
- Hot Glue
- Screws
- Plywood (27’’x40’’)
- Movie Poster
- Table Glass
- L bracket
Directions
1. Assemble each leg using 4 VHS tapes. (32 total)
2. Hot glue together so the covers are facing the outside.
3. Repeat step for all 4 legs.
4. Use additional VHS tapes and create a border around the edge of the plywood.
5. Cut the top off your VHS jackets.
6. Cut down the spine of the jacket and slip around the tapes.
7. Hot glue covers to tapes.
8. Attach a piece of plywood cut to 27’’x40’’ as your top.
9. Reinforce base with “L” brackets.
10. Insert movie poster on top of plywood.
11. Cover with piece of table glass cut to 27’’x 40’’
Return to the Episode Guide >>
Check out more fun DIY projects at the Home & Family Pinterest Page