Materials
- Nail gun
- Wood panels
- Wood glue
- Cordless drill
- Pencil
- Safety glasses
- Tape measure
- Polyurethane
- Extended glides
Directions
1. Measure the Bottom Cabinet
2. Measure the width of your kitchen base cabinet inside the frame.
3. Cut wood or pre cut at hardware store
4. Glue wood board on base, hold down and use nail gun
5. Repeat on the other side
6. Once drawer is complete, screw on glides
Directions for Top Cabinet Drawers
1. Glue small wood panels on each side and use nail gun to secure
2. Repeat on all sides
3. Measure the middle of the side wood panel
4. With a pencil mark the front and back side
5. Extend the glide and screw in the top of the rail to the side drawer
6. Repeat on other side