Ken Wingard is has a creative DIY using thick belts and wood.


  • Belts
  • Wood
  • Studs
  • Screws
  • Hammer
  • Measuring Tape


1. Mark and measure both wooden planks

2. Attach belts together to make two identical loops

3. Hold first plank between both belts and align if needed

4. Screw in the belts to the boards

5. Position boards on their sides and secure the belt into the second plank

6. Once boards are secure, make sure belt buckles are secured and tightened

7. Screw in shelving into the studs in your wall (use stud finder to locate if needed)\

Get more information about this episode >>