Materials
- 1 ¾ inch iron pipe
- 12 Flanges
- 4 Pipe 18"
- 4 Pipe 24"
- 4 Pipe 30"
- 12 End caps
- 1 2"x12"x6' board
Directions:
1. Cut the board into 16”, 24”, and 30” lengths (You can have the hardware store pre-cut this).
2. Screw flange to each corner of the 3 boards.
3. Screw legs (the pipes) into flanges to create legs.
4. Add end caps to pipes.
