Instructions
- 4 1” Dowels (18” long)
- 2 1x2” Boards (Length depends on width of planter)
- Drill Press w/ Forstner Bit
- Drill
- Jigsaw
- Wood Glue
- ¼” Dowel Pins
- Clamp
- Safety Goggles
- Tape Measure
- Pencil
- Ceramic Planter (Straight-Sided Cylinder)
Directions
1. Cut 1x2” boards to be slightly larger than the width of your pot
2. Cut ¾” x ¾” notch in center of each 1x2” board
3. Use 1” drill press w/ forstner bit to drill half circle curve into end of board
TIP: You can also use a regular drill if you don’t have a drill press. Make sure to have someone
else help secure it in place.
4. Use ¾” drill bit & drill hole into the end of each 1x2” board and ½” into the dowel 8” from
bottom
5. Insert ¼” dowel pins into hole in 1x2”, add wood glue, and insert dowel
6. Repeat on all 4 legs
7. Attach 2 legs together via notch
