Materials
- Frames
- Wreaths
- Spray Paint
- Printer
- Paper
- Foam core
- Spray adhesive
- Embellishments
Directions
1. To start with the 3D wreath you’re going to want to make sure they fit in your frames good
2. Then spray paint your wreaths with a little bit of white spray paint to give it a snowy look
3. Finish your wreath by adding extra foliage & hot glue on embellishments like holly for a pop of color
4. Take your frame & add a little push pin into the frame so you can hang your wreath within the frame
5. For the framed prints your going to just print out your favorite words/ sayings onto paper
6. Once printed cut out & spray adhesive to the back of paper & attach to foam core
7. Take your frame & put in whatever decorative paper you chose as the background inside of the frame. Then secure the backing in.
8. Next, using hot glue, glue on the foam core to attach in the center of frame
9. Once you have all your wreaths secured into the frames & all your prints put together then it’s time to hang
10. Place sheets of paper that are in the size of your frames onto wall to see how much spacing you want in between
11. Last but not least, hang your frames! Be sure to separate your 3D frames from your prints to give it a nice cohesive look
12. Ta-da!
