Materials
- Dresser
- Plywood
- Dog Bowls
- Jig Saw
- Nail Gun
- Wood Glue
- Paint
DIY Dog Feeding Station - Home & Family
Directions
1. Remove the bottom drawer from your dresse
2. Measure out two pieces of wood to fit the two sides (width) of the drawer
3. Measure out two pieces of wood to fit the bottom (this will hold the two sides in) and the top (this will sit on the two pieces of wood on the sides
4. Measure two holes the size of your dog’s food and water bowl.
5. Outline the two circles then cut with a jig saw
6. Secure the top wood to the two side woods using wood glue and a nail