Materials
- Round mirror
- 4 Boots
- Plywood
- Rope
- Staple gun
- Mirror mastic
- E6000 glue
- Regular Scissors
Directions
1. The first thing you’re going to need to do is cut your plywood to create a base to attach your mirror to. This way you have a frame to set your boot tops on.
2. Cut plywood 5 inches longer than the mirror on the whole circumference
3. Glue mirror to plywood using your mastic mirror glue
4. It’s time to cut your boots. Using regular scissors cut the tops of your boots off. So cut them in half & then cut them down the sides to get your squares
5. Dab a little of E6000 on the back of the boot square & attach to the mirror frame. Let dry & then keep layering
6. Once the boots are on & they’re dry use a staple gun & staple gun the boots on the side for extra security
7. Trim all the excess boot around the edges
8. Using glue add a little rope around the inside of the mirror for a nice finish