Materials
- PVC Pipe
- Hack Saw
- White Paint
- Red Tape
- Solar Light
- Glue Dots
DIY Candy Cane Lights - Home & Family
DIrections
1. Cut PVC pipe to 2 feet length
2. Cut the bottom of the PVC pipe on a diagonal so it can easily go into the ground
3. Clean PVC pipe with acetone and apply light coat of paint to give it a clean look
4. Tape red duct tape around the PVC pipe diagonally
Tip: If the tape bubbles up, pull it back to release the air, and then continue
5. Glue the solar light to top of PVC pipe using glue dots
6. Place pipe into ground
