DIY Bookshelf Tree with Ken Wingard
• Craft Paint
• Drill, screw gun
• Wall anchors/wall sockets
• Craft foam
• 1x4 wooden planks
• Double Stick Tape
Paint your tree design on wall.
Create your leaves from craft foam or contact paper and attach to tree.
Shelves should be 1 inch/4 inches, length will vary depending on how you painted branches. Rises should be uniform (5 inches or so).
Drill both pieces of wood together.
Attach L-brackets to wood and drill into wall sockets (Note: wood and L brackets should be painted to match wall tree color).
Take a moment to check out these tree and leaf design templates
And a special thanks to PepperDesignBlog.com. for project inspiration.
For more, visit Ken Wingard at KennethWingard.com and follow him on Twitter @KennethWingard.
Return to episode guide >>