• view all showtimes

DIY Cornhole Game

DIY Cornhole Game
Materials:
1. Wood
a. Pre-cut 2x4's at a hardware store i. 2x48" ii. 2x21" iii. 2x11" b. Pre-cut ½" plywood 24" x 48" 2. Screw Gun + Screws 3. Hammer + Nails 4. Paint 5. Jigsaw

Steps:

1. Get pre-cut 2x4's from a hardware store. You'll need 2x48", 2x21", and 2x11". 2. Screw in to make box. 3. For your platform, buy a pre-cut board from a lumber store like Home Depot - approximately 24" x 48". 4. Glue and nail top platform onto box. 5. Cut a 6" diameter hole centered 9" from top of board and centered 12" from each side edge. 6. Screw in legs so that the back of the board is 12" from the ground to the top of the playing surface.